This was a second time i had ordered these types of strip LED lights. Unlike the first ones, which i ordered from a different seller, these are thinner, brighter and very easy to install. Additionally, I accidentally cut the strip too short and when i reached out to the seller for an additional part (which i was intending to pay for) they offered a new item at no cost. Very well handled! I will definetely order from them again. Thanks for your business.
This roll is fantastic. The sticky back side is holding in place without issue. I used these to create a vanity mirror which my wife loves. I learned after that fact that they sell 90 degree corner adapters. I just flexed it around the bend and you can’t tell when it’s on. The dimmer is also a nice feature.
These worked great! Repurposed an old mirror and these seem to have stuck well so far... the adhesive is strong, so I’m hoping it stays on. Came with clips to tack cords to wall, which I assume will help keep the weight of the cords from pulling the light strips off. Has 5-6 brightness settings. The dimmest is great for makeup & it only gets brighter from there! Photos I posted show dimmest & brightest settings. Great quality. Works perfectly. Did not disappoint! I put on a mirror with a white frame and it doesn’t look odd at all when lights are off, as I saw some reviewers experienced with theirs. Perhaps a white frame is the secret :) I hope these last a long time! Would, and likely will, buy these again!
I purchased two separate units for two separate projects. Also, I was concerned that one roll wouldn't do my entire 1st project. I ended up using the first roll for my 1st project with lights left over! Install was easy, peel the tape off and stick on the surface. I actually purchased some connectors from a different seller and they barely fit and were more of a pain to deal with rather than making it easier. I wish I would have soldered directly to the light strip. They've only been installed for a few days but they added highlighting to my kitchen and light for the counter top. Hopefully they will last a long time.
Our church has two cafeteria type food warmers which had track lighting which did not working. I took the tracks off turned them upside down thus giving a good surface to mount the LED strip lighting. I cleaned the back of the tracks with alcohol and placed the adhesive LED lighting strips in place, for safety purposes I tack the LED lighting strips about every 6 inch with a hot glue gun. Then replaced track light to its original with the LED lighting strips facing down, then secured the wiring harness with zip ties and stuck the switch, which had a very good adhesive system that worked extremely well. If I could had given 6 or 7 stars I would have done so. The cost was less that 25 bucks, if we would have gone with original lights it would have been more than 100. So we are very happy. Blessings Jim
Feature Product
- 【Dimmable Mirror Lights】 This 16.4ft led strip light by unique design and development of a simple controller convenient to adjust brightness, the brightness controlled by switch dimmer( included)
- 【Super Bright and Safe to Use】 The led strip lighting kit includes 300 bright LEDs. And the working voltage is 12V, extremely Low Heat. It is touchable.
- 【Easy Installation】 Our LED light strip designated with blue strong adhesive. The LED tape for safe and easy application, clean and dry surface, do not worry about falling off.
- 【Widely Use】The LED vanity mirror light kit has excellent heat dissipation, making it much more durable. It is also very suitable for living room, kitchen cabinet, under cabinet, dining room, bedroom, party, stairway, ceiling, etc.
- 【Standard Kit】LED rope lights can be DIY for different size of the mirror,flexible for different shape of the mirror. This LED vanity mirror light kit can be cut between every 3 leds. Come with LED strips, A power adapter and a dimmer.
Description
Specifications:
●Color: Daylight White
●Size of LEDs: 2835 LEDs
●Length of a tape: 5m/ 16.4ft
●Quantity of LEDs : 300
●Working Voltage: 12V DC
●Dimmable:YES.
●Waterproof: NO
●Shapes Available: This strip light can be cut and is connectable, you can create a lot of different shapes.
●Safe to use: The working voltage is 12V. Extremely low heat. It is touchable and safe to children.
●Urable: By adopting qualified FPC circuit board and LEDs, the strip has excellent heat dissipation, making it much more durable.
●Flexible operations: Slim, compact and flexible PCB strip. Mount end-to-end for bendable or angled patterns, or in continuous rows.
●Eco-Friendly, RoHS compliant: No battery. No lead or mercury. No UV or IR Radiation.
●Reduce re-lamp frequency: Lifespan is over 50,000 hrs. Save effort and maintenance costs on changing lights frequently.
Package Include:
●- LED strip dimmer
●- User Manual
●- LED Strip Lights
●- 12V 3A Power Supply Adapter.
Only thing to think about, if your gonna use these for the back side of a bathroom Mirrior like I did, will the moisture from the shower effect these over time? These are non waterproof just wondering if over time they may fail. I guess I’ll take the risk. Only minor complaint. I’m using these on a motion sensor. When the lights are turned on there is a 1-2 second “delay” from the time you turn them on until the lights actually light up, not a deal killer just letting you know.
Look it.... backing sticks very well and fits my 70in tv perfectly
I am SO PLEASED with these lights. I had a shallow closet with two doors to access it, and no light to speak of. I wear mostly black, and as you can see by the first photo it was almost impossible to see anything in that closet. I affixed these lights underneath the shelf that hangs above the clothing rod, and then ran the wire around the door and out of the closet to the outlet. I'll also affix the remote control to the doorframe when I get some command tape (see photo), I worry the regular tape it comes with will peel the paint on the doorframe.
I read other reviews and saw that the clips that come with the kit don't tend to hold it up, so I did try and also buy some screw in clips to hold up the LED strip, but the clips I bought were too big (the LED strip is SUPER thin) and I ended up just using clear tape for most of it. Probably gonna either buy some other clips or maybe just use more command tape.
these light strips are priced perfectly, they are super easy to install if you need to overcome multiple corners purchase the LED Strip Connector Right Angle Corner Connector, cut across the lines (black line marked on the brass contacts) slide the cut portion in and bingo! they are super bright and dimmable if you want less light. We put them under our kitchen cabinets and they are bright enough that we don't need the overhead light! while researching these lights i came across some youtubers who said these were not worth the money then went on to show some garbage LED's from a different company. their lights shorted out of you plugged them in the wrong way, the Minger lights only plug in one way, that is user friendly folks. if you are looking for lights for the purpose of illuminating an area, the Mingers LED's are for you, if you want poo lights with a remote that have colors bound to burn out, go for the other LED's
I bought this product to add lights to my vanity mirror, instead of paying a fortune for a Hollywood mirror. The product was nicely packaged, easy instructions, comes with an adhesive back clicker that I’ve hidden under the vanity for easy access. It totally has worked for what I wanted it for. Only complaint I have, that really doesn’t bother much, is that the adhesive for the lights doesn’t stick incredibly well. You can see in my photo that it’s coming up on the sides.
0 comments:
Post a Comment