These legs came in super handy. We bought a new 55" Vizio television that had the legs positioned at the corners of the tv. This meant that the TV would no longer stand on our TV stand as the old TV it was replacing had a center pedestal base and the new TVs legs were too wide to stand on our old TV stand. These legs mount in the vesa holes on the back of the TV, where you would normally put a wall bracket. That means the feet are much closer together than the original feet that came with the new Vizio. This enabled us to use our existing TV stand. The TV feels super sturdy even with these legs attached. We have 2 kids under 10 and a dog and I don't feel like the TV has any more chance of falling over that it did with the original legs. It does raise the television up a few inches higher than the original legs, but in our case i liked that. It may matter to others if you already have a high tv stand tho. I was very happy to be able to resolve our problem for 20 bucks instead of buying an entire new television stand. Took all of 10 minutes to attach to the TV. I would highly recommend this product to others in the same situation.
Works great for my LG 55" (model 55LF6090). I needed to raise it a few inches so it would clear the sound bar which was blocking the receiver for the remote on the TV. It's a Smart TV, so we'd have to stand up to use the Apps. Assembly is easy and instructions are good. Others have mentioned that the paint on the threading makes it hard cranking down the nuts. I ended up using a socket wrench instead of the provided wrench. The labeled plastic packaging was a big help, but two parts were switched (A3 and B3 in the attached image). It was easy to recognize, so didn't slow me down much. It's very stable. I only have a couple of quibbles. One is the the forward portion of the feet are higher than I expected. Understandable so that it can be strong, but I ended up resting the sound bar on top of the feet because they won't fit underneath it. Also, it's great that they come with rubber material to protect the furniture from being scratched. My only concern is that it is rubber, and I live in a warm climate that might disintegrate the material over time and cause it to stick to the console it's sitting on. I'm thinking of putting some felt foot pads underneath to prevent that from happening. Overall, though, happy with the purchase.
This TV stand was PERFECT. I have a 32 in flat screen TV that was mounted on a wall in my previous home. Long story short we wanted to put it in the spare room in our new home and have it sit on a tv stand....turns out we lost the base that came with the TV during the move. This was the perfect alternative and is actually a lot sturdier than the base that it originally came with. It was super easy to put together too.
Years ago, we'd mounted a 32" "dumb" Samsung TV with the idea we'd only remove it once it died so we tossed the pedestal. A month ago, the TV appeared to have died. DH said he'd checked all the connections (quite a few as we had a Sling box attached to it as well as a cable box), and connections were not the problem. We ordered a new TV ("smart" one, now), and I went to disconnect everything. Doing so, I discovered the power cord seemed really loose. I replaced it with another and, bam! , the TV works again. No problem as I can put that one in another room except for one thing---no pedestal. I was thrilled to find something so inexpensive. This is one sturdy, stable holder. At first, we installed the TV higher up, but it was too high so we moved it lower. You can see that it's still not as low as it can go. It can also go much higher, if that's what you need. Originally, we had it about midway up on the VESA 400x400 connection points. It was incredibly stable. It was also a snap to readjust the height. Once set on the chest of drawers, I found that the front of the feet could move a little (maybe 1"-2") in/out to meet your needs. The stand did arrive with a note that assured buyers that it would work on 22" TV's even though the box indicated larger units.
Considering the price, I was hesitant to purchase for my 65" television. But after reading the reviews I decided to purchase. The instructions could've been a little better but all and all it wasn't that hard to put together. I am happy with my purchase thus far. The television doesn't tilt, (as other reviews stated) and legs seem to be sturdy enough to hold my 65" without any problems. In short, this is a great replacement stand for the price. I would recommend.
Feature Product
- COMPATIBILITY - TV tabletop stand fits screens from 22" to 65" in size with mounting holes between 75mm x 75mm and 800mm x 400mm
- STRENGTH TESTED - Solid steel legs hold weights up to 110 lbs
- OPTIMUM BALANCE - By design STAND-TV00Y provides a greater level of support and balance than your TV's original base
- NO SCRATCH - Bottom feet are padded to protect furniture surfaces
- EASY SETUP - Simple TV attachment process with all necessary hardware provided
Description
Heavy duty table top TV stand (STAND-TV00Y) from VIVO! With height adjustability and durable sleek designing, this is an ideal TV stand solution for your flat panel TV. The Stand can be used for desktops, table tops, or dressers in the bedroom. This is simple to attach and comes with all the necessary hardware to get your flat screen up and mounted. STAND-TV00Y is also much more stable than the original stand that comes with flat screens today. The feet of the base measure 14" in length and feature padding to avoid scratching on table and dresser surfaces. The weight capacity for this stand is 110 lbs and is designed to fit 22” to 65” flat screens with VESA 75 x 75mm to 800 x 400mm hole patterns (The top piece on each leg is removable to fit smaller TV's)
Son donated a great newer 55" Sony Bravia tv but not the stand. After searching I ordered this one thinking it would substantial but not cost a fortune. This was easy to assemble, fit perfectly and is very stable. The box was missing the instructions so I looked at another review where the purchaser posted a photo of the booklet pages. Instructions do help! The flat base is a plus and we were able to set the tv above our sound bar which sits flat on the base. Many tv stands are sloped...for design and appearance purposes I guess. The tv does not lean forward and can be adjusted to do that with washers. I recommend this stand to anyone who does not want to mount on a wall. Stores just do not seem to carry stands anymore, just wall mounts. We looked at all of the large retailers in our area and could not find one stand.
These mounting brackets allow for a smaller surface to set your new big screen TV on. The standard legs on the TV I purchased are almost at the ends of the screen and it's a 65 inch model. You need a large surface for that to work; but with these easy to assemble brackets allow my TV to fit on a normal TV stand that I used to have my old analog 32 inch TV sitting on. The new TV is totally stable due to the oversize "feet" on this mounting set. I bought this set because they were said to handle up to a 65 inch TV. Most of the other ones out there tell you 60 inches; well you don't spend that kind of money on your TV and hope the cheaper brackets work.
Super easy to put together. Packaged great with supplies to accommodate different tv's. Excellent price. Only issue is that the covers for the legs (pieces A3 and B3) don't really seure on well (if I were to tap it it could come loose), that said it is well enough to be keep them on once placed. If I could have my wish list, it would be that this could tilt or swivel even if only a few inches. Regardless, it's strong, secure, easy to put together, amd affordable. I'd recomend this. The pictures show a 40" Samsung LED LCD TV.
I used this stand to replace the stand that came with my 60" Panasonic model VT60 plasma TV, which weighs 88 pounds without any stand. The VIVO stand permits two heights, and the larger height raises the bottom edge of my TV to exactly 7" above the surface the TV is placed on. This is enough for me to slide a center-channel speaker under the TV, which was my motivation for this purchase. The stand has no problem at all with the weight of my relatively heavy TV. Nothing is "shaky." The stand is well-manufactured, and well-finished; it is probably as attractive as a pair of flat-black legs can be. A surprising bargain at this low price.
I was pleased to order this knowing it was highly reviewed, pleased to feel the weight of the small box it came in, then very skeptical when I opened the box.
This is easy to assemble and might be confusing when you consider that it comes with 16x the amount of screws needed for any TV. However, all you will need are the 4 nuts, 8 small allen head screws and 4 acorn nuts and you can assemble it in 5-10 minutes reusing the original screws on the back of your TV.
After quick assembly, I mounted them on my new 70" Vizio E70 that weighs around 70 pounds and thought that the legs might not be sturdy enough. After placing the TV on my smallish TV stand, the legs somehow feel like they transfer the weight of the TV to the bottom center and the TV feels very stable.
This is a 5 star rating because it can be a permanent solution for anyone out there that needs to mount a large TV on a small stand, it costs so little, and it feels very secure!
0 comments:
Post a Comment